Fort Washington, PA – Starting in January 2013, PartMaker Inc., a division of Delcam Plc, will host a nine city, nationwide user group tour to educate customers and prospective PartMaker users on the new technology available in the recently released PartMaker Version 2013. This nationwide tour is titled the “PartMaker 2013 Road Show” where the theme is that attendees should “Forget What You Think You Know About PartMaker!”
The PartMaker 2013 Road Show kicks off in January in Memphis, Tennessee, concluding in May in Minneapolis, Minnesota. Each road show stop is two days in duration. The first half day of each road show stop will be a more general, theatre style presentation discussing the new technology available in PartMaker 2013. The second day and half of each session will be a more technical, hands training session for attendees who wish to receive training on the new Advanced Surface Machining module in PartMaker Version 2013.
The specific schedule for the PartMaker 2013 Road Show is as follows:
January 30 – 31: Memphis, Tennessee
February 6 – 7: Philadelphia, Pennsylvania
February 12 – 13: Ft. Lauderdale, Florida
February 27 – 28: Los Angeles, California
March 13 – 14: New England (Sturbridge, Massachusetts)
March 26 – 27: Rochester, New York
April 3 – 4: Chicago, Illinois
April 17 – 18: Columbus, Ohio
May 8 – 9: Minneapolis, Minnesota
A complete schedule, detailed explanation and registration form for each stop can be found at http://www.partmaker.com/roadshow2013/
“PartMaker Version 2013 is probably the most significant PartMaker release made in the history of the product” says PartMaker Inc. division President Hanan Fishman. “With a new ultra-sleek user interface and a host of new, advanced milling strategies, PartMaker Version 2013 offers its users perhaps the most comprehensive and powerful CAM system on the market today for the full spectrum of production machining applications, all while maintaining the software’s hallmark, industry-leading ease of use.”
“With such a PartMaker 2013 being such a significant release, we thought, what better way to educate the advanced manufacturing community than to visit a number of the major markets in which we are present and explain the new technology, in a friendly, face to face forum that is fun, educational and great networking event for attendees.”
More on PartMaker Version 2013
PartMaker Version 2013 features a sleeker, restyled user interface. Headlining the improvements in the user interface in PartMaker 2013 is the Job Explorer tree which makes navigating Machining Function Face Windows and Part Features faster. Additionally, a number of new controls have been added to the software to make working even more intuitive. Also, a number of diagrams in the software have been recast and revamped to give PartMaker 2013 a fresh new look. While the user interface enhancements are numerous, PartMaker 2013 has retained the software’s traditional work flow with its industry leading ease of use so existing users will not have to worry about any relearning, they will just be able to be more productive.
The new high-end milling functionality available in PartMaker Version 2013 is known as the Advanced Surface Machining module, or ASM for short. ASM replaces PartMaker’s Surface Machining Wizard (SMW) module for surface machining of free form shapes. For existing PartMaker users, the upgrade to ASM will be provided free of cost and the transition will be very easy to make.
The benefits of the ASM module for PartMaker users are numerous. They will allow for faster tool path calculation, greater tool control and improved surface finishes, among other benefits.
The ASM module features a wide variety of high-end milling strategies that can be applied across the entire suite of PartMaker CAM applications including PartMaker Mill, PartMaker Turn-Mill and PartMaker SwissCAM. The powerful surface machining strategies in ASM are the same as those found in PowerMILL, Delcam’s industry leading CAM system for the manufacture of complex shapes.
More on PartMaker
PartMaker is a Knowledge Based Machining system, allowing it to provide a substantial gain in programming efficiency by remembering the tools, material and process information necessary to machine individual part features. It thus relieves the user from reentering the same features information for subsequent parts. It also improves productivity by placing the emphasis on tool management functions.
PartMaker pioneered the field of CAM software for Turn-Mills and Swiss-type lathes with its patented Visual Programming Approach for programming multi-axis lathes with live tooling. It assures quicker learning and easier use. It makes an extensive use of pictures to help the user describe tools, part features and machining data. Synchronization of tools working on multiple spindles is achieved by a few mouse clicks.
PartMaker Inc. is a subsidiary of Delcam Plc, the world’s leading developer and supplier of complete CAD/CAM software solutions. Delcam Plc is publicly traded on the AIM exchange in London. In North America PartMaker is sold directly by PartMaker Inc. PartMaker is sold overseas through a network of sales partner offices operating in over 120 countries.
