oday’s show is the first episode of our new season about Swiss-Type CNC machining. Our guest is Marc Klecka, founder and president of Concentric Corporation, a prominent distributor of Citizen-Cincom CNC Swiss lathes in Cleveland, Ohio.
Marc talks about his company, Concentric, which has been distributing Citizen Swiss machines for 31 years and Miyano for 10 years (after Citizen acquired the company). (2:20)
Marc gives his “5-year-old explanation” of Swiss CNC Machining (sliding headstock machining). He says the original technology of “Swiss style machining” was developed in Switzerland over a hundred years ago for producing high precision watch components. He says what differentiates CNC Swiss machining from conventional CNC turning is that a CNC Swiss machine grips the part with a collet and also supports the part with a guide bushing. This eliminates the vibration that normally occurs when machining bar on a a conventional CNC lathe. (3:00)
Marc says a traditional Swiss part has a length to diameter ratio of 3 to 1 or more because that is the point where you start sacrificing the rigidity and accuracy on a conventional CNC lathe. He tells a story about a Citizen customer who produced a 10-foot part out of aluminum tubing. (4:40)
Marc talks about the importance of running ground bar stock on Swiss machines, particularly for running lights-out. However, he says that says in the 31-year history of Concentric, he estimates that only 30% of the material run (in Swiss mode) on the machines he has sold has been ground bar stock. He says it is a misconception that Swiss Style CNC machines are only good for running ground stock. (7:25)
Marc says that during 2020 Concentric’s business did ok, but the pandemic made it more difficult to sell machines because it was harder to have in person contact with customers. (11:00)
Marc says that there are lots of good brands of machine tools on the market, but he sees the support and service of local distributors as something that sets Citizen apart. He says that many years ago Marubeni Citizen made a point of having all of its local distributors become self-sufficient for servicing customers. He says that all the Citizen sales engineers also are applications engineers. He says it is important to have sales people who can get in the trenches with customers to solve their problems. (12:00)
Marc talks about Citizen’s proprietary LFV (low frequency vibration) technology, which is featured in many of the latest models. It enables operators to control the geometry of the chip coming off the machine using the machine’s CNC control. He says this capability is significant for manufacturers who want to do lightly attended or unattended machining. (17:20)
Marc talks about the significance of the medical sector for Citizen machines. He explains thread whirling for making long bone screws. He discusses a bone screw that was made on a Citizen featuring a laser that performed a cut on that part while still inside the machine (see video). (21:45)
Marc talks about diverse markets where he sees Citizens being used. He says during COVID-19 woodworking has become more popular and Citizen machines are making tools used for the art. Also, he says tattoos have become more popular during the pandemic and Citizen machines are making parts that go into the tattoo gun pens. He says demand continues to grow for parts for the electric car markets. (26:00)
Noah asks Marc tell him something he learned the week before. Marc jokes hat he learned it probably was not a great thing to break into the Capital building. He also said that he learned about the new LNS chip conveyors that are being put on some of the newest Citizen machines equipped with LFV technology. (31:00)
Question: Which Swiss machine do you prefer to use and why?